Overview Introduction interior wall board interior wall board, is a multi-layer is a phenolic resin impregnated kraft paper and the finest imported by melamine treated decorative colored paper, then stacked with pressed steel etch at high temperature and pressure environment . The thickness can also need to adjust, from 1.6mm to 30mm Jieke production. Wall Plate - wall plate installation instructions the following two basic requirements: ① using dry suspending of installations, we recommend using wooden keel; ② in accordance with the requirements of breathing curtain wall plate, sheet and plate, sheet and cornice (or roof), we must keep the seam between the plate and the ground, to ensure the free flow of air medical wall plate, inside and outside temperature difference on both sides of the plate kept to a minimum wall decoration board, in order to avoid the plate cause expansion and contraction due to temperature. 1 hospital wall board construction design 1) Taking into account the large deformation stress node hospital wall plate wall plate under the influence of temperature difference, decisions hospital use dry hanging wall plate installation mode. Which uses U-shaped pendant hung on a cross-keel, so that it can freely deformed in the horizontal direction, using the tongue and groove of the indwelling 8mm slit in the vertical direction to meet the needs of its free deformation. Wall plate keel _ Siping wall panels (certified) _ Wall Plate Co., Ltd. provided by Nanjing Jubilee furniture. Nanjing Spring Thunder Furniture Co., Ltd. (www.njclyy.com) is Nanjing, the table leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In the Jubilee chair industry leadership with the staff warmly welcome all inquiries negotiations to create the Jubilee chair industry a better future.